HPE 561FLR-T Dual Port 10G RJ45 FlexibleLOM
2 × 10G RJ45
- Gen9
- Gen10
If your server hosts virtual machines or attaches to a storage network, the onboard gigabit port is usually the first bottleneck you hit — and the cheapest upgrade available to you.
56 parts
2 × 10G RJ45
2 × 10G SFP+
2 × 25G SFP28
4 × 1G RJ45
2 × 10G SFP+
2 × 10G SFP+
2 × 40G QSFP+
2 × 25G SFP28
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
network or storage adapter
Prices are based on the global market average in euro.
RJ45 runs on ordinary copper with no separate module — the simplest route to ten gigabit over short distances. SFP+ needs a module, but draws less power, runs cooler, and is the only option for long runs and fibre. One important caveat: some switches accept only their own branded modules, so check before buying one.
A FlexibleLOM card sits in the board’s dedicated slot, which leaves your PCIe slots available for a GPU or a storage controller. A PCIe card does not fit a FlexibleLOM slot, or the other way round. In a 1U server with only two or three PCIe slots, that distinction decides the build.
A dual-port card can be configured for redundancy (one fails, the other carries on) or for more bandwidth with LACP. The second mode also requires configuration on the switch side; without it, traffic uses a single port only. And even with LACP a single TCP connection is still bound to one port — the real gain appears when you have many concurrent connections.
Three things: a 10 Gb adapter in the server, a switch with 10 Gb ports, and the right medium — Cat6a cable for RJ45, or a module plus fibre (or a DAC cable) for SFP+. If any one is missing the link simply negotiates down to a lower speed, with no error shown.
Yes. An SFP28 card with a 10 Gb SFP+ module works against a 10 Gb switch and negotiates at that speed. Which means you can buy a 25 Gb card today and reach 25 later by upgrading only the switch — and used 25 Gb cards often cost no more than 10 Gb ones.
Online — here to help
From your first server to your next big idea. Let’s find your way forward.
AI answers · Backed by ServerNet support