Browse parts
SAS HARD DRIVE.jpg — Family reference image, not the supplied model HPE 300GB 12G 10K SAS 2.5" SFF — Schematic illustration

Family reference image, not the supplied model: SAS HARD DRIVE.jpg

HPE Refurbished In stock

HPE 300GB 12G 10K SAS 2.5" SFF

300 GB · SAS 12G · 10K

A 300 GB 10K rpm mechanical drive on a SAS 12G interface for Gen8 / Gen9 / Gen10 / Gen11 servers.

Compatible with: Gen8 Gen9 Gen10 Gen11

Specifications

Capacity 300 GB
Interface SAS 12G
Type 10K rpm
Estimated IOPS 180
Compatible generation Gen8 / Gen9 / Gen10 / Gen11

Overview

The HPE 300GB 12G 10K SAS 2.5" SFF is a 300 GB 10K rpm mechanical drive on a SAS 12G interface, for HPE ProLiant Gen8 / Gen9 / Gen10 / Gen11 servers. For archives, backups and large files a mechanical drive still delivers the cheapest gigabyte. Not for an OS volume or a database, where latency becomes the bottleneck. Two practical notes. First, the drive has to come in the caddy for its generation — the Gen8–Gen10 Smart Carrier and the Gen10-and-later Basic Carrier are not interchangeable, and a bare drive will not seat in a hot-plug bay. Second, in a RAID array every member should have the same capacity and speed; if one is smaller, the controller treats every disk as if it were that size. Every drive is SMART-checked and surface-tested before it ships, and its power-on hours are disclosed.

Applications, trade-offs and selection guide

Primary storage or archive?

For databases and VMs, assess latency, IOPS and write endurance. Backup and archive decisions emphasize usable capacity, cost per TB and recovery time. The SSD label alone does not establish endurance, power-loss protection or continuous-write suitability.

Match interface and chassis

SAS, SATA and NVMe use different connection paths. Verify SFF/LFF, carrier, backplane, cables and controller. Physical fit alone does not establish electrical or firmware support.

Drive health and data protection

For used drives, request health, error history and power-on hours or total writes. RAID usable capacity differs from the sum of raw drive capacity. RAID does not replace independent backups and restore testing.

The image identifies the model or family. Request a photo and part number of the actual unit when enquiring.

SAS HARD DRIVE.jpg · Jaroslaw B · CC BY-SA 4.0 · Resized, white canvas, converted to WebP

Manufacturer documentation and lookup

Similar parts