HP 750W Common Slot Platinum Hot-Plug
750 W · 80 PLUS Platinum
- Gen8
The power supply is the component that fails most often in a server. With two fitted, a failure is a red light; with one, it is an outage. Always build with two, even when a single unit covers your load.
4 parts
750 W · 80 PLUS Platinum
460 W · 80 PLUS Platinum
500 W · 80 PLUS Platinum
1400 W · 80 PLUS Platinum
Prices are based on the global market average in euro.
Gen6 to Gen8 servers use Common Slot supplies; Gen9 onwards use Flex Slot. Their dimensions and connectors differ, and confusing them means a part that will not go in the bay. Compatible generations are printed on every supply’s label, and we state the same on each product.
A typical dual-socket server with 8 to 12 drives draws roughly 400 to 600 W at full load; 800 W covers most configurations with safe headroom. With a processor above 200 W or a GPU, move to 1400 W or higher. An oversized supply does not consume extra power — it simply runs away from its efficiency sweet spot.
Fit two supplies of different wattage and the server warns in iLO and does not treat the redundancy as guaranteed — because if the larger one fails, the smaller may not carry the full load. So when one dies, its replacement must match the wattage, not merely be “another PSU”.
Yes, provided two are fitted and the healthy one can carry the load alone. ProLiant supplies are hot-plug: press the latch, slide the unit out and seat the new one. With only one supply, pulling it means the server shuts down.
A Platinum rating means roughly 94% of the input power reaches the server and the rest becomes heat. Against an 85% unit, on a 500 W server that is about 450 kWh saved per year — and more important than the electricity bill is the heat your rack cooling no longer has to remove.
Online — here to help