Network cards

If your server hosts virtual machines or attaches to a storage network, the onboard gigabit port is usually the first bottleneck you hit — and the cheapest upgrade available to you.

Browse parts
Server generation All generations Gen8 Gen9 Gen10 Gen11
Max price All generations up to €30.00 up to €70.00 up to €100.00
Sort by Recommended Price: low to high Price: high to low Name Clear filters

2 parts

Prices are based on the global market average in euro.

Buying guide

RJ45 or SFP+?

RJ45 runs on ordinary copper with no separate module — the simplest route to ten gigabit over short distances. SFP+ needs a module, but draws less power, runs cooler, and is the only option for long runs and fibre. One important caveat: some switches accept only their own branded modules, so check before buying one.

FlexibleLOM keeps your PCIe slots free

A FlexibleLOM card sits in the board’s dedicated slot, which leaves your PCIe slots available for a GPU or a storage controller. A PCIe card does not fit a FlexibleLOM slot, or the other way round. In a 1U server with only two or three PCIe slots, that distinction decides the build.

Two ports means redundancy, not automatically double speed

A dual-port card can be configured for redundancy (one fails, the other carries on) or for more bandwidth with LACP. The second mode also requires configuration on the switch side; without it, traffic uses a single port only. And even with LACP a single TCP connection is still bound to one port — the real gain appears when you have many concurrent connections.

Frequently asked questions

What do I need for 10 gigabit?

Three things: a 10 Gb adapter in the server, a switch with 10 Gb ports, and the right medium — Cat6a cable for RJ45, or a module plus fibre (or a DAC cable) for SFP+. If any one is missing the link simply negotiates down to a lower speed, with no error shown.

Will a 25 Gb card work with a 10 Gb switch?

Yes. An SFP28 card with a 10 Gb SFP+ module works against a 10 Gb switch and negotiates at that speed. Which means you can buy a 25 Gb card today and reach 25 later by upgrading only the switch — and used 25 Gb cards often cost no more than 10 Gb ones.